viernes, 18 de abril de 2008

Final Project



Components:
2 resistors of 1K
1 pot of 100k
1 capacitor of 47nF
1 capacitor of 0.01 uF
1 Led
Sourse of 5 volts
1 Protoboard
Cables

First we conect the resistors, to the pines , 1k to pin 6, and this one conected to pin 7, remember that pin 2 and pin 6 are conected together, the capacitors are conected to pin 6 and pin 5, both capacitors are conected to ground, finally we conect the pot with the other resistor of 1k, and this pote goes to the sourse of 5 volts, pin 4 and pin 8 are conected too, the out we can see it with the led in pin 3,any doubt see the diagram of the circuit, finally we connect the source of 5 volts

As we see led goes on and off, that’s because of the frecuency, if we move the pot, we can increase the frecuency faster o slower. This circuit can be used in many others circuits to give a needed signal.

lunes, 14 de abril de 2008

HOW TO repLace A SOnY erICksson LCd

This video explains how to replace a soy ericksson lcd screen, i think this video is very helpfull because is a easy way to understand the process to repair the cellphone, only with a few instruments, you can fix your own cellphone without go out of your home, this is the link:

www.videojug.com/film/how-to-replace-a-sony-ericsson-w580-lcd

JOb INterView


Good Afternoon

Tell me a little about yourself:

My name is Juan Tovar I’m twenty one years old and single. I live in Maracaibo, Venezuela since I was a child. I speak Spanish and English, I learned English here in Venezuela at CEVAZ

What did you study?

I studied Electronics Engineering Mention telecommunications at URBE in Maracaibo- Venezuela, I had been there for four years; and during this time I made courses of Cisco Company in the same university. I also started to study Science Computer at LUZ in Maracaibo, Venezuela, which I still studying it.

Have you ever worked?

I got my first job at Movistar last year, I worked like communications manager. I gained experienced in communications equipments and networks equipments

Why would you like to work with us?

I’d like to work here, because I enjoyed my last job, and It is similar to this one,Very Good Mr Tovar, I will call youThanks for your Time.


Good afternoon

Hi, tell me a little about yourself:

My name is Daniela Jimenez, I am 20 years old, I am from Venezuela, but now I am living in United States.

Tell me about your education:

I studied 4 years at URBE and I got my title like Bachelor of Science in Electrical Engineering. Also I finished the course of Cisco; I took 19 levels at CEVAZ so I can speak English very well.

Describe yourself:I'm very organized, I'm a self-motivated worker, but I enjoy working as a team player. My belief is that since we spend the majority of our lives in the workplace, work should be a nice experience.

Why would you like to work with us?

I know how to operate standard bench top lab test equipment; I have enough knowledge of Analog/Digital circuit design, also experience in the use of design analysis tools.

Very Good Mss Jimenez , I will call you Thanks for your time

domingo, 13 de abril de 2008

Final OPinion

my opinion is that ingles 7 is much entertained of which waited because the form to be the class change, using elements multimedia like blogs and the paginas Web, become much easy the work of the student, also student learns in the same way or better what the professor says, and also the work of the student is published and can be seen everywhere,

WhAt We hAve to dO in a Job InTerRviEw?


Job interviewing never seems to get any easier - even when you have gone on more interviews than you can count. You are meeting new people, selling yourself and your skills, and often getting the third degree about what you know or don't know. Here are job interview tips to help prepare you to interview effectively. Proper preparation which help alleviate some of the stress involved in job interviews.
Job Interview Tips
Practice
Practice answering interview questions and practice your responses to the typical job interview questions and answers most employers ask. Think of actual examples you can use to describe your skills. Providing evidence of your successes is a great way to promote your candidacy.
Prepare
Know the interviewer's name and use it during the job interview. If you're not sure of the name, call and ask prior to the interview. Try to relate what you know about the company when answering questions.
Get Ready
Make sure your interview attire is neat, tidy and appropriate for the type of firm you are interviewing with. Bring a nice portfolio with copies of your resume. Include a pen and paper for note taking.
Be On time
Be on time for the interview. On time means five to ten minutes early. If need be, take some time to drive to the office ahead of time so you know exactly where you are going and how long it will take to get there.
Stay Calm
During the job interview try to relax and stay as calm possible. Take a moment to regroup. Maintain eye contact with the interviewer. Listen to the entire question before you answer and pay attention - you will be embarrassed if you forget the question!
Show What Your Know
Try to relate what you know about the company when answering questions. When discussing your career accomplishments match them to what the company is looking for.
Follow Up
Always follow-up with a thank you note reiterating your interest in the position. If you interview with multiple people send each one a thank you note.

TalKinG ABoUT A picTUre


A breadboard (solderless breadboard, plugboard) is a reusable solderless device used to build a (generally temporary) prototypeof an electronic circuit and for experimenting with circuit designs. This is in contrast to stripboard (veroboard) and similar prototyping printed circuit boards, which are used to build more permanent prototypes or one-offs, and cannot easily be reused. A variety of electronic systems may be prototyped by using breadboards, from small circuits to complete central processing units (CPUs).The term breadboard is derived from an early form of point-to-point construction; and in particular the practice of constructing simple demonstration circuits (usually using valves/tubes) on a convenient wooden base, (similar to a cutting board).